Numerical modeling of slope stability incorporating complex reinforcement solution in high-risk failure area- unusual case study

  • Affiliations:

    1 Hanoi University of Mining and Geology, Hanoi, Vietnam
    2 Warsaw University Of Life Sciences, Warsaw, Poland
    3 Fucons Foundation and Underground, Hanoi, Vietnam

  • *Corresponding:
    This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Received: 15th-June-2021
  • Revised: 16th-Sept-2021
  • Accepted: 14th-Oct-2021
  • Online: 31st-Dec-2021
Pages: 48 - 57
Views: 2848
Downloads: 1155
Rating: 1.0, Total rating: 114
Yours rating

Abstract:

The rapid economic development of Vietnam triggers a number of challenges in all sectors including infrastructure design and execution. New development plans and lack of space in densely populated and economically valuable areas creates a need for complex engineering solutions to meet the demand. The present research is a case study investigating reengineered vast natural slope to meet all requirements for geotechnical safety such as maximum displacements and factor of safety. Complex ground conditions and significant dimensions of the slope made the entire structure very likely to cause major risk for the future development plan of the site. Due to complex conditions, the slope was divided into 4 main sections. Each section was reinforced using a combination of soil nails, ground anchors, drainage systems and micro piles, of 19m for a single pile. Due to very much limited space available new geometry of the slope was designed for inclination reaching 1:0.3. Based on numerical modelling and computation the results revealed that the maximum lateral displacements felt in a range of 37-50x10-3 m and the factor of safety was 1.56-1.65, depending on a section and analysed scenario. The computations allowed proposing combined geotechnical solutions for very much challenging sites, assuring high safety standards and fitting the entire design within a limited available area.

How to Cite
Pham, N.Anh, Osinski, P., Do, N.Anh, Koda, E., Nguyen, M.Van, Bui, D.Van and Tao, N.Van 2021. Numerical modeling of slope stability incorporating complex reinforcement solution in high-risk failure area- unusual case study. Journal of Mining and Earth Sciences. 62, 6 (Dec, 2021), 48-57. DOI:https://doi.org/10.46326/JMES.2021.62(6).07.
References

Babu, G. S., Murthy, B. S., Murthy, D. S. N., and Nataraj, M. S., (2004). Bearing capacity improvement using micropiles: A case study. GeoSupport, 692-699.

Bayesteh, H., Fakharnia, M. A., and Khodaparast, M., (2021). Performance of Driven Grouted Micropiles: Full-Scale Field Study. International Journal of Geomechanics, 21(2), 04020250.

Berglund, E. Z., Monroe, J. G., Ahmed, I., Noghabaei, M., Do, J., Pesantez, J. E., ... and Levis, J., (2020). Smart infrastructure: a vision for the role of the civil engineering profession in smart cities. Journal of Infrastructure Systems, 26(2), 03120001.

Blanco-Fernandez, E., Castro-Fresno, D., Díaz, J. D. C., and Lopez-Quijada, L., (2011). Flexible systems anchored to the ground for slope stabilisation: Critical review of existing design methods. Engineering Geology, 122(3-4), 129-145.

Brinkgreve, R. B. J., Swolfs, W. M., Engin, E., Waterman, D., Chesaru, A., Bonnier, P. G., and Galavi, V., (2010). PLAXIS 2D 2010. User manual, Plaxis bv.

Crosta, G. B., and Frattini, P., (2008). Rainfall‐induced landslides and debris flows. Hydrological Processes: An International Journal, 22(4), 473-477.

Dai, F. C., Lee, C. F., and Ngai, Y. Y., (2002). Landslide risk assessment and management: an overview. Engineering geology, 64(1), 65-87.

Dhar, U., (2021). Asian Development Bank (ADB), What Drives Innovation in Asia? Asian Development Outlook 2020.

Elia, G., Cotecchia, F., Pedone, G., Vaunat, J., Vardon, P. J., Pereira, C., ... and Osinski, P., (2017). Numerical modelling of slope–vegetation–atmosphere interaction: an overview. Quarterly Journal of Engineering Geology and Hydrogeology, 50(3), 249-270.

Ellis, I. W., (2020). Ground anchors. In The Maintenance of Brick and Stone Masonry Structures (pp. 271-281). CRC Press.

Farshidfar, N., and Nayeri, A., (2015). Slope stability analysis by shear strength reduction method. Civil Engineering and Urbanism Journal, 5, 35-37.

Fredlund, D. G., Xing, A., Fredlund, M. D., and Barbour, S. L., (1996). The relationship of the unsaturated soil shear strength to the soil-water characteristic curve. Canadian geotechnical journal, 33(3), 440-448.

Lazarte, C. A., Robinson, h., and Gómez, J., (2015). Soil Nail Walls Reference Manual: FHWA-NHI-14-007.

Nguyen, P. N., Woo, S. H., Beresford, A., and Pettit, S., (2020a). Competition, market concentration, and relative efficiency of major container ports in Southeast Asia. Journal of Transport Geography, 83, 102653.

Nguyen, P. T., Likhitruangsilp, V., and Onishi, M., (2020b). Success factors for public-private partnership infrastructure projects in Vietnam. International Journal on Advanced Science, Engineering and Information Technology, 10(2), 858-865.

Osiński, P., Dobrzelewski, B., Koda, E., and Król, P., (2020). Slope stability analyses incorporating soil improvement methods for valuable urban area. In Geotechnics for Sustainable Infrastructure Development (pp. 803-808). Springer, Singapore.

Peck, R.B. ,(1969). Deep Excavation and Tunneling in Soft Ground. State-of-the-Art Report. Proceedings of the 7th International Conference on Soil Mechanics and Foundation Engineering, Mexico, 225-325.

Rahardjo, H., Hritzuk, K. J., Leong, E. C., and Rezaur, R. B., (2003). Effectiveness of horizontal drains for slope stability. Engineering Geology, 69(3-4), 295-308.

Seah, S., Ha, H. T., Martinus, M., and Thao, P. T. P., (2021). The state of Southeast Asia: 2021 survey report.

Tang, A. M., Hughes, P. N., Dijkstra, T. A., Askarinejad, A., Brenčič, M., Cui, Y. J., ... and Van Beek, V., (2018). Atmosphere–vegetation–soil interactions in a climate change context; impact of changing conditions on engineered transport infrastructure slopes in Europe. Quarterly Journal of Engineering Geology and Hydrogeology, 51(2), 156-168.

Thyagaraj, T. (2019). Ground Improvement Techniques and Geosynthetics. Springer: Berlin, Germany.

Wan, S., Nian, T., Jiang, J., and Luan, M. T., (2010). Discussion on several issues in slope stability analysis based on shear strength reduction finite element methods (SSR-FEM). Rock and Soil Mechanics, 31(7), 2283-2290.

Zettler, A. H., Poisel, R., Roth, W., and Preh, A., (2020). Slope stability analysis based on the shear reduction technique in 3D. In FLAC and Numerical Modeling in Geomechanics (pp. 11-16). CRC Press.

Zhang, C., Lijun, S. U., Weizhi, C. H. E. N., and Jiang, G., (2021). Full-scale performance testing of bored piles with retaining walls in high cutting slope. Transportation Geotechnics, 29, 100563.

Other articles