Archives
 
Year 2022
 
Vol 63, Issue 3a, [07 - 2022] - Full papers

Effect of soil Young’s modulus on Sub-rectangular tunnels behavior under quasi-static loadings

DOI:10.46326/JMES.2022.63(3a).02

  • Affiliations:

    1 Faculty of Civil Engineering, Hanoi University of Mining and Geology, Vietnam 2 School of Automotive and Transportation Engineering, Hefei Univ. of Technology, China
    3 Geotechnical expert, Antea Group, Antony, France

  • *Corresponding:
    This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Received: 18th-Oct-2021
  • Revised: 28th-Jan-2022
  • Accepted: 21st-Mar-2022
  • Online: 31st-July-2022
Pages: 10 - 21
Views: 4050
View onlineView online
Downloads: 2248
Downdload PDF
★★★★★Rating: 1.0, Total rating: 224
  • ★
  • ★
  • ★
  • ★
  • ★
Yours rating

Abstract:

Tunnels are an important component of the transportation and utility system of cities. They are being constructed at an increasing rate to facilitate the need for space expansion in densely populated urban areas and mega-cities. The circular and rectangular tunnels cannot completely meet the requirements of underground space exploitation regarding the cross-section. Sub-rectangular tunnels are recently used to overcome some drawbacks of circular and rectangular tunnels in terms of low utilization space ratio and stress concentration, respectively. However, the behavior of the sub-rectangular tunnels under seismic loading is still limited. This need to be regarded and improved. This paper focuses on conducting a numerical analysis to study the behavior of the sub-rectangular tunnels under seismic loadings. Here seismic loadings in this study are represented by quasi-static loadings. Based on the numerical model of the circular tunnel that was validated by comparison with analytical solutions, the numerical model of the sub-rectangular tunnel is created. This paper is devoted to highlight the differences between the behavior of the sub-rectangular tunnels compared with the circular ones subjected to quasi-static loadings. The soil-lining interaction, i.e., full slip and no-slip conditions are particularly considered. The influence of soil’s Young’s modulus on the sub-rectangular tunnel behavior under quasi-static loading is also investigated. The results indicated that soil’s Young’s modulus significantly affects static, incremental, and total internal forces in the tunnel lining under quasi-static loadings. Special attention is a significant difference in total internal forces in the sub-rectangular tunnel lining in comparison with the circular tunnel ones and the stability of the lining tunnel for both the full slip and no-slip conditions when subjected to quasi-static loadings.

How to Cite
Pham, V.Van, Do, A.Ngoc, Vo, H.Trong, ., D.Dias, Nguyen, T.Chi and Hoi, D.Xuan 2022. Effect of soil Young’s modulus on Sub-rectangular tunnels behavior under quasi-static loadings (in Vietnamese). Journal of Mining and Earth Sciences. 63, 3a (Jul, 2022), 10-21. DOI:https://doi.org/10.46326/JMES.2022.63(3a).02.
References

Bobet, A., (2003). Effect of pore water pressure on tunnel support during static and seismic. Tunnelling and Underground Space Technology 18, 377-393.Do, N. A., Dias, D., Zixin, Z., Xin, H., Nguyen T. T., Pham V. V., Ouahcène, N. R., (2020). Study on the behavior of squared and sub-rectangular tunnels using the Hyperstatic Reaction Method. Transportation Geotechnics 22.Do N. ., Dias D., Oreste P. P. , Djeran-Maigre I., (2015). 2D Numerical Investigation of Segmental Tunnel Lining under Seismic Loading. Soil Dynamics and Earthquake Engineering 72, 66-76.FHWA, (2004). Seimic retrofitting manual for highway struttures: Part 2 – retaining strutures, slopes, tunnels, culverts, and roadways. U.S. Department of transportation. Federal Highway Administration. Publication No. FHWA-HRT-05-067.Hashash, Y. M. A., Hook, J. J., Schmidt, B., Yao, J. I. C., (2001). Seismic design and analysis of underground structures. Tunnelling and Undergound Space Technology 16, 247–293.Hashash, Y. M. A., Park, D. and Yao, J. I. C., (2005). Ovaling deformations of circular tunnels under seismic loading, an update on seismic design and analysis of underground structures. Tunnelling and Underground Space Technology 20, 435-441.Itasca Consulting Group, (2012). FLAC Fast Lagrangian Analysis of Continua, Version 5.0. User's manual, Available: 〈http.itascacg.com〉.Kouretzis, G., Sloan, S. W. and Carter, J. P., (2013). Effect of interface friction on tunnel liner internal forces due to seismic S- and P-wave propagation. Soil Dynamic and Earthquake Engineering 46, 41-51.Liu, X., Ye, Y., Liu, Z., Huang, D., (2018). Mechanical behavior of Quasi-rectangular segmental tunnel linings: First results from full-scale ring tests. Tunn. Undergr. Space Technol 71, 440-454. Naggar, HE and Hinchberger, SD., (2012). Approximate evaluation of stresses in degraded tunnel linings. Soil Dynamics and Earthquake Engineering 43, 45-57.Naggar, H. E., Hinchberge, S. D., Hesham, M. and Naggar, E. I., (2008). Simplified analysis of sesmic in-plane stresses in composite and jointed tunnel linings. Tunnelling and Underground Space Technology 28, 1063-1077.Nakamura, H., Kubota, T., Furukawa, M., (2003). Unified construction of running track tunnel and crossover tunnel for subway by rectangular shape double track cross-section shield machine. Tunnelling and Underground Space Technology 18(2), 253-262.Nguyen, D. D., Park, D., Shamsher, S., Nguyen, V. Q., Lee, T. H., (2019). Seismic vulnerability assessment of rectangular cut-and-cover subway tunnels. Tunnelling and Underground Space Technology 86, 247–261.Nguyen, T. T., Do, N. A., Karasev, M. A., Dang, V. K., Dias, D., (2020). Tunnel Shape Influence on the Tunnel Lining Behavior. Proceeding of ICE - Geotechnical Engineering. doi.org/10.1680/jgeen.20.00057.Park, K. H., Tantayopin, K., Tontavanich, B and Owatsiriwong, A., (2009). Analytical solution for seismic-induced ovaling of circular tunnel lining under no-slip interface conditions: A revisit. Tunnelling and Underground Space Technology 24, 231-235.Penzien, Z., (2000). Seismically induced racking of tunnel linings. Int. J. Earthquake Eng. Struct. Dynamic 29, 683-691.Sederat, H., Kozak, A., Hashash, Y. M. A., Shamsabadi, A. and Krimotat, A., (2009). Contact interface in seismic analysis of circular tunnels. Tunnelling and Underground Space Technology 24, 482-490.Sun, Q. Q., Du, D., Dias, D., (2020). An improved Hyperstatic Reaction Method for tunnels under seismic loading. Tunnelling and Underground Space Technology. DOI: 10.1016/j.tust.2020.103687.Tsinidis, G., Silva, F. D., Anastasopoulos, I., Bilotta, E., (2020). Seismic behavior of tunnels: From experiments to analysis. Tunnelling and Underground Space Technology 99, 103334.Wang, J. N., (1993). Seismic design of tunnels: A state-of-the-art approach, Brinckerhoff Quade and Douglas Inc., New York.Zhang, Z. X., Zhu, Y. T., Zhu, Y. F., (2017). Development and application of a 1:1 mechanical test system for special-shaped shield lining with a large cross-section. Chinese Journal of Rock Mechanics and Engineering 12(36), 2895-2905. (in Chinese)Zhu, Y. T., Zhang, Z. X., Zhu, Y. F., (2017). Capturing the cracking characteristics of concrete lining during prototype tests of a special-shaped tunnel using 3D DIC photogrammetry, Eur J Environ Civ Eng, 1–21. Zhang, Z.; Zhu, Y.; Huang, X.; Zhu, Y.; Liu, W., (2019). “Standing” full-scale loading tests on the mechanical behavior of a special-shape shield lining under shallowly-buried conditions. Tunnelling and Underground Space Technology 86(1), 34-50.

Other articles