Numerical simulation of a direct shear test on rock joint based on finite difference code

https://tapchi.humg.edu.vn/en/archives?article=499
  • Affiliations:

    1 Hanoi University of Mining and Geology, Vietnam;
    2 TU Bergakademie Freiberg, Germany

  • Received: 18th-Apr-2016
  • Revised: 12th-June-2016
  • Accepted: 30th-June-2016
  • Online: 30th-June-2016
Views: 2462
Downloads: 741
Rating: 1.0, Total rating: 74
Yours rating

Abstract:

The presence of discontinuities in a rock mass may have a significant influence on shear strength. The most popular method currently used to determine the joint shear strength is a direct shear test which can be performed by using a direct shear apparatus. In this article, the direct shear tests on jointed rock under constant normal load condition are carried out using the code FLAC3D. A rough joint of rock sample is simulated via using 3D-scanned data. The shear behaviour of rock joint at a given different normal stresses corresponded well to those observed in laboratory tests. The numerical simulation results also show that the normal stress concentration at contact areas, especially at the tips of asperities, is higher in comparison to initial applied normal stress and can lead to failure of these parts.

How to Cite
Nguyen, M.Van and H., K. 2016. Numerical simulation of a direct shear test on rock joint based on finite difference code. Journal of Mining and Earth Sciences. 54 (Jun, 2016).

Other articles