Accuracy assessment of open - pit mine’s digital surface models generated using photos captured by Unmanned Aerial Vehicles in the post - processing kinematic mode
- Authors: Long Quoc Nguyen
Hanoi University of Mining and Geology, Hanoi, Vietnam
- Received: 19th-Mar-2021
- Revised: 23rd-June-2021
- Accepted: 19th-July-2021
- Online: 31st-Aug-2021
- Section: Geomatics and Land Administration
To evaluate the accuracy of the digital surface model (DSM) of an open-pit mine produced using photos captured by the unmanned aerial vehicle equipped with the post-processing dynamic satellite positioning technology (UAV/PPK), a DSM model of the Deo Nai open-pit coal mine was built in two cases: (1) only using images taken from UAV/PPK and (2) using images taken from UAV/PPK and ground control points (GCPs). These DSMs are evaluated in two ways: using checkpoints (CPs) and comparing the entire generated DSM with the DSM established by the electronic total station. The obtained results show that if using CPs, in case 1, the errors in horizontal and vertical dimension were 6.8 and 34.3 cm, respectively. When using two or more GCPs (case 2), the horizontal and vertical errors are at the centimetre-level (4.5 cm and 4.7 cm); if using the DSM comparison, the same accuracy as case 2 was also obtained.
Vietnam Ministry of Industry and Trading, (2015). Vietnam standards for mine surveying. Institute of Vietnam national standard, Hanoi. (in Vietnamese).
Bui, D.T., Long, N. Q., Xuan - Nam, B., Viet Nghia, N., Chung, P.V., Canh, L.V., Phuong Thao, T.N., Dung, B.T., Kristoffersen, B., (2017). Lightweight unmanned aerial vehicle and structure - from - motion photogrammetry for generating digital surface model for open - pit coal mine area and its accuracy assessment. In International Conference on Geo - Spatial Technologies and Earth Resources. Springer, 17 - 33. DOI: 10.1007/978 - 3 - 319 - 68240 - 2_2.
Bui, N. Q., Le, D. H., Nguyen, Q. L., Tong, S. S., Duong, A. Q., Pham, V. H., Phan, T. H., Pham, T. L., (2020). Method of defining the parameters for UAV point cloud classification algorithm. Journal of the Polish Mineral Engineering Society, 1, 46.49 - 56, 2020. DOI 10.29227/IM - 2020 - 02 - 08.
DJI, (2020). Phantom 4 RTK Visionary Intelligence, https://www.dji.com/phantom - 4 - rtk.
Fazeli, H., Samadzadegan, F., Dadrass Javan, F., (2016). Evaluating the potential of RTK - UAV for automatic point cloud generation in 3D rapid mapping. ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, XLI - B6, 221 - 226. DOI:10.5194/isprsarchives - XLI - B6 - 221 - 2016.
Forlani, G., Dall’Asta, E., Diotri, F., Cella, U., Roncella, R., Santise, M., (2018). Quality assessment of DSMs produced from UAV flights georeferenced with on - board RTK positioning. Remote Sensing, 10(2), 1 - 22. DOI: 10.3390/rs10020311
Long, N. Q., Xuan - Nam, B., Cuong C. X., Canh, L. V., (2019). An approach of mapping quarries in Vietnam using low - cost Unmanned Aerial Vehicles. Sustainable Development of Mountain Territories 11(2), 199 - 210. DOI: 10.21177/ 1998 - 4502 - 2019 - 11 - 2 - 199 - 201.
Nguyen, Q. L., Le, T. T. H., Tong, S. S., Kim, T. T. H., (2020). UAV Photogrammetry-Based For Open Pit Coal Mine Large Scale Mapping, Case Studies In Cam Pha City, Vietnam. Sustainable Development of Mountain Territories, 12(4), 501-509. DOI: 10.21177/1998-4502-2020-12-4-501-509.
Nguyen, Q. L., Ropesh, G., Bui, K. L., Le, V. C., Cao, X. C., Pham, V. C., Bui, N. Q., Xuan - Nam, B., (2020). Inﬂuence of Flight Height on The Accuracy of UAV Derived Digital Elevation Model at Complex Terrain. Inżynieria Mineralna, 1(45), p. 179 - 186. DOI: http://doi.org/10.29227/ IM - 2020 - 01 - 27.
Nguyen Quoc Long, Michał M Buczek, Sylwia A Szlapińska, Bui Xuan Nam, Nguyen Viet Nghia, Cao Xuan Cuong, (2018). Accuracy assessment of mine walls’ surface models derived from terrestrial laser scanning. International Journal of Coal Science and Technology, Vol. 5, 3, 328-338.
Nguyen, Q. L., Le, V. C., (2020). Applicability of low-cost unmanned aerial vehicles in measurement for the inventory of mineral reserves of open-pit mines. Journal of Mining Industry, 02, 79 - 85. (in Vietnamese).
Nguyen Viet Nghia, Nguyen Quoc Long, Pham Cong Khai, Le Van Canh, Michal Buczek, (2016). Applications of Continuously Operating Reference Station Technology for Surveying and Mapping of Open Pit Mine. International Conference on Advances in Mining and Tunneling, ICAMT (2016). 247-253.
Nguyen Viet Nghia, Nguyen Quoc Long, Nguyen Thi Cuc, Xuan-Nam Bui, (2019). Applied Terrestrial Laser Scanning for coal mine High Definition mapping. World of Mining - Surface and Underground, 71.4. 237-242.
Nguyen, V. N., (2020). Building DEM for deep open-pit coal mines using DJI Inspire 2 (in Vietnamese). Journal of Mining and Earth Sciences. 61, 1 (Feb, 2020), 1-10. DOI:https://doi.org/10.46326/JMES.2020.61(1). 01. (in Vietnamese).
Taddia, Y., Stecchi, F., Pellegrinelli, A., (2019). Using DJI Phantom 4 RTK drone for topographic mapping of coastal areas. Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci. XLII - 2/W13, 625 - 630. DOI: 10.5194/isprs - archives - XLII - 2 - W13 - 625 - 2019.
Tran, T. A., Quach, M. T., (2020). Analysis for the selection of precise camera posistion mode of unmanned aerial vehicle in large scale topographically mapping. Proceeding of National conference on Earth Sciences and Natural Resources for Sustainable Development (ERSD 2020), 1 - 8. (in Vietnamese).
Van Canh, L., Xuan Cuong, C., Quoc Long, N., Thi Thu Ha, L., Trung Anh, T., and Bui, X. - N. (2020). Experimental Investigation on the Performance of DJI Phantom 4 RTK in the PPK Mode for 3D Mapping Open - Pit Mines. Test, 1(2), 65 - 74. https://doi.org/10.29227/IM - 2020 - 02 - 10.